MYTH # 1 IN THE CASE OF DAMAGE TO THE ACRYLIC BATH, IT IS IMPOSSIBLE TO REPAIR

TRUTH: The outstanding feature of acrylic is that it is easy to repair. If it is a scratch or dent, then the place of damage is sanded and polished. In case of serious damage, a specialist fills the area with liquid acrylic, grinds and polishes. There are no traces of repair.

MYTH #3 WHEN FILLING WATER BATHROOM NOISE

TRUTH: The main noise when drawing water into the bathroom comes from the mixer, not the bathtub. The sound of falling water in the bathroom itself is heard only in the first minutes, and a stream of water, falling into the already collected water, makes the same noise in the bathroom from any material. Moreover, acrylic perfectly absorbs sound, water is poured into a bath made from it, almost noiselessly!

MYTH # 4 ACRYLIC BATH BAD PRESERTS WATER TEMPERATURE

TRUTH: Acrylic has low thermal conductivity, taking on ambient temperature, that is, it is initially warmer than cast iron or steel counterparts. A bath filled with water cools down very slowly: by 1 degree for 30 minutes. Thanks to these properties, acrylic baths are used in spas and water spas.

MYTH # 5 ACRYLIC BATHROOM NEEDS SPECIAL CARE

TRUE: Acrylic has a very dense molecular structure and, as a result, does not absorb dirt and rust. Any liquid cleaning agent can be used to maintain hygiene. The surface is very smooth, so even a simple rinse of the bath is sufficient for cleaning. The only thing that is prohibited is the use of chemical solvents and abrasive powders.

MYTH # 6 LIGHT WEIGHT – THE BATH CAN TIPPING

TRUTH: In fact, acrylic bathtubs do not weigh much. This does not mean that the bathtub is unstable. Thanks to this, transportation and installation is much easier than cast iron or steel counterparts. Using original frames or legs, professional installation, the bathtub is almost impossible to tip over.